Why are some car paints so much more expensive than others?
Ever wondered why one respray quote comes back at twice the price of another for what looks like the same job? The answer is usually the paint itself. Here is what actually drives the cost, with real examples of the repairs we carry out every week.
Published 30 August 2026 · Whaley Bridge Accident Repair Centre
It starts with the paint itself
A basic solid colour, the kind you see on many white vans and entry-level cars, is a single-stage product. The colour and the gloss are in one coat, it covers well, and the tin cost is modest. That is why a straightforward solid white panel is usually the cheapest respray you will ever be quoted.
Metallic paints cost more because they contain finely ground aluminium flakes suspended in the colour. Those flakes are what give the paint its sparkle, but they also mean the finish changes depending on how the gun is held, the air pressure and even the temperature in the booth. The painter has to work harder to get an even laydown, and the paint itself is dearer per litre.
Pearlescent and three-stage colours
Pearlescent paints replace metal flake with mica or ceramic-coated particles that bend light. Many modern whites, reds and blues are actually three-stage systems: a coloured ground coat, a translucent pearl mid-coat, then lacquer. Each stage has to be applied within tight film-thickness tolerances, and the mid-coat coverage directly changes the final colour.
That means more materials, more booth time and more skill. A three-stage pearl bumper that looks simple on the car can take twice as long to paint as the same bumper in solid white, and the materials alone can cost three or four times as much. This is the single biggest reason two quotes for the same panel can look so far apart.
Colour matching is skilled labour, not a lookup table
Every manufacturer colour has variants. The same paint code can have several shades depending on the factory, the year and even the batch. Sun fade adds another layer on top: a five-year-old red car is not the same red it left the factory wearing.
A good bodyshop mixes the colour, sprays test cards, compares them against the panel in natural light and adjusts before a drop of paint goes near your car. That process takes time and consumables, and it is a big part of what you are paying for when you choose a BS 10125 accredited repairer over the cheapest quote.
Blending, lacquer and booth time
Metallic and pearl finishes cannot be polished into an invisible join the way solid colours sometimes can. To make a repair disappear, the painter blends the new colour into the neighbouring panels and then lacquers across the full area. More panels painted means more paint, more lacquer and more time in the spray booth, all of which is reflected in the price.
Modern water-based basecoats, now required across the industry, also cost more than the older solvent products and need controlled drying conditions. Add in infrared curing, masking, preparation and the energy cost of running a booth, and you can see why paintwork pricing is about far more than the tin of colour.
Matt, satin and specialist finishes
Matt and satin factory finishes are the most expensive of all to repair. They cannot be polished, they mark easily during preparation, and any repair that falls short usually means refinishing the whole panel, sometimes the whole side of the car. Ceramic-infused and candy colours sit in the same bracket: beautiful, but unforgiving.
When you get a quote that feels high, ask what paint system your car uses. Nine times out of ten the answer explains the number.
Not sure what your car needs?
Send us photos of the damage and we will tell you exactly what paint system your car uses and what a proper repair involves, before you commit to anything.
Related reading: why BS 10125 matters when choosing who repairs your car and our paintwork repair service .
What good paintwork looks like
Illustrative examples of kerbed bumpers, key scratches and failed lacquer. These are not photographs of WBARC customer repairs.

BeforeAfterKerbed bumper corner
Deep kerb scuff through the paint, repaired and refinished in the original metallic blue.

BeforeAfterKey scratch down a door
Scratch cut through to primer, flatted, blended and lacquered back to a factory finish.

BeforeAfterPeeling lacquer on a bonnet
Failed clear coat stripped, the panel resprayed and polished back to a deep, even gloss.
Illustrative examples showing typical damage and finish standards, not photographs of specific customer vehicles. Your own repair is quoted after inspection.